(1) All switchboards, panelboards, and distribution boards installed for the control of light and power circuits
(2) Battery-charging panels supplied from light or power circuits
b. As part of a listed assembly
348.1 Scope. This article covers the use, installation, and construction specifications for flexible metal conduit (FMC) and associated fittings.
348.2 Definition.
limitations would exceed those for which the nonmetallic wireway is listed
378.21 Size of Conductors. No conductor larger than that for which the nonmetallic wireway is designed shall be installed in any nonmetallic wireway.
378.22 Number of Conductors. The sum of cross- sectional areas of all contained conductors at any cross section of the nonmetallic wireway shall not exceed 20
Table 409.3 Other Articles
Equipment/Occupancy Article
Branch circuits 210
Luminaires 410
Motors, motor circuits, and 430
controllers
Air-conditioning and 440
refrigerating equipment
Section
380.1 Scope. This article covers the use and installation requirements for multioutlet assemblies.
380.2 Use.
(A) Permitted. The use of a multioutlet assembly shall be permitted in dry locations.
(B) Not Permitted. A multioutlet assembly shall not be installed as follows:
410.1 Scope. This article covers luminaires, portable
construction specifications for rigid polyvinyl chloride con
duit (PVC) and associated fittings.
FPN: Refer to Article 353 for High Density Polyethylene Conduit: Type HDPE, and Article 355 for Reinforced Thermosetting Resin Conduit: Type RTRC.
382.1 Scope. This article covers the use, installation, and construction specifications for nonmetallic extensions.
382.2 Definitions.
I. General
FPN: Refer to Article 352 for Rigid Polyvinyl Chloride Conduit: Type PVC and Article 355 for Reinforced Ther- mosetting Resin Conduit: Type RTRC.
